View ISL21060BFH625Z-TK_4324460.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
ISL21060 Precision Reference with Disable
Data Sheet December 16, 2008 FN6706.3
Precision, Low Noise FGATM Voltage References
The ISL21060 FGATM voltage references are low power, high precision voltage references fabricated on Intersil's proprietary Floating Gate Analog technology. A new disable feature allows the device to shut down the output and reduce supply current drain from 15A operating to <500nA. The ISL21060 family features guaranteed initial accuracy as low as 1.0mV with drift down to 10ppm/C. Noise is typically 10VP-P (10Hz BW). This combination of high initial accuracy, low power and low output noise performance of the ISL21060 enables versatile high performance control and data acquisition applications with low power consumption.
Features
* Reference Output Voltage . . . . . . . . . . . . 2.048V, 2.500V, 3.000V, 3.300V, 4.096V * Initial Accuracy . . . . . . . . . . . . . . . . . . . ..1.0mV, 2.5mV * Input Voltage Range - ISL21060-20 . . . . . . . . . . . . . . . . . . . . . . . . 2.5V to 5.5V - ISL21060-25 . . . . . . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V - ISL21060-30 . . . . . . . . . . . . . . . . . . . . . . . . 3.2V to 5.5V - ISL21060-33 . . . . . . . . . . . . . . . . . . . . . . . . 3.5V to 5.5V - ISL21060-41 . . . . . . . . . . . . . . . . . . . . . . . . 4.3V to 5.5V * Output Voltage Noise . . . . . . . . . 10VP-P (0.1Hz to 10Hz) * Supply Current . . . . . . . . . . . . . . . . . . . . . . . . .40A (Max) * Tempco. . . . . . . . . . . . . . . . . . . . . . . 10ppm/C, 25ppm/C
Pinout
ISL21060 (6 LD SOT-23) TOP VIEW
NC GND EN 1 2 3 6 5 4 VOUTF VOUTS VIN
* Output Current Capability. . . . . . . . . . . . . . +10.0mA/-5mA * Operating Temperature Range. . . . . . . . . -40C to +125C * Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Ld SOT-23 * Pb-Free (RoHS compliant)
Applications
* High Resolution A/Ds and D/As * Digital Meters * Bar Code Scanners * Basestations * Battery Management/Monitoring * Industrial/Instrumentation Equipment
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2008. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
ISL21060 Pin Descriptions
PIN NUMBER 1 2 3 4 5 6 PIN NAME NC GND EN VIN VOUTS VOUTF DESCRIPTION No Connect; Do Not Connect Ground Connection Enable Input. Active High. Do not Float. Input Voltage Connection Voltage Reference Output Connection (Sense) Voltage Reference Output Connection (Force)
Ordering Information
PART NUMBER (Note) ISL21060BFH620Z-TK* ISL21060CFH620Z-TK* ISL21060BFH625Z-TK* ISL21060CFH625Z-TK* ISL21060BFH630Z-TK* ISL21060CFH630Z-TK* ISL21060CFH633Z-TK* ISL21060BFH641Z-TK* ISL21060CFH641Z-TK* PART MARKING GACB GACD GAEA GAGA GAHA GAJA GAPA GACC GACE VOUT OPTION (V) 2.048 2.048 2.500 2.500 3.000 3.000 3.300 4.096 4.096 GRADE (mV) 1.0 2.5 1.0 2.5 1.0 2.5 2.5 1.0 2.5 TEMP. RANGE (ppm/C) 10 25 10 25 10 25 25 10 25 PACKAGE (Pb-Free) 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 6 Ld SOT-23 PKG. DWG. # MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038
*Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2
FN6706.3 December 16, 2008
ISL21060
Absolute Voltage Ratings
Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V VOUT to GND (10s). . . . . . . . . . . . . . . . . . . . . .-0.5V to VOUT + 1V Voltage on "DNC" pins . . . . . No connections permitted to these pins ESD Rating Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5500V Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .550V Charged Device Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2kV
Thermal Information
Thermal Resistance (Typical, Note 1) JA (C/W) 6 Ld SOT-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Continuous Power Dissipation (TA = +70C, Note 3) Storage Temperature Range . . . . . . . . . . . . . . . . . -65C to +150C 6 Ld SOT-23, derate 5.88mW/C above +70C . . . . . . . . . . . . . . . . . . . . . . . . . 471mW Pb-free Reflow Profile (Note 2). . . . . . . . . . . . . . . . . . see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature Range (Industrial) . . . . . . . . . . . . . . . .-40C to +125C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
NOTE: 1. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details. 2. Post-reflow drift for the ISL21060 devices will range from 100V to 1.0mV based on experimental results with devices on FR4 double sided boards. The design engineer must take this into account when considering the reference voltage after assembly.
Electrical Specifications
PARAMETER VOUT VOA Output Voltage
(ISL21060-20, VOUT = 2.048V) VIN = 3.0V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
CONDITIONS MIN TYP 2.048 ISL21060B20 ISL21060C20 -1.0 -2.5 +1.0 +2.5 10 25 2.5 VEN = VIN 2.5V < VIN < 5.5V Sourcing: 0mA IOUT 10mA Sinking: -5mA IOUT 0mA 16 50 3 150 50 300 75 10 2.5 60 100 100 5.5 40 150 50 400 MAX UNIT V mV mV ppm/C ppm/C V A V/V V/mA V/mA mA s dB VP-P VRMS nV/Hz ppm ppm
DESCRIPTION
VOUT Accuracy @ TA = +25C
TC VOUT
Output Voltage Temperature Coefficient (Note 3) Input Voltage Range Supply Current Line Regulation Load Regulation
ISL21060B ISL21060C
VIN IIN VOUT /VIN VOUT/IOUT
ISC tR
Short Circuit Current Turn-on Settling Time Ripple Rejection
TA = +25C, VOUT tied to GND VOUT = 0.1% f = 10kHz 0.1Hz f 10Hz 10Hz f 1kHz f = 1kHz TA = +165C TA = +25C
eN VN
Output Voltage Noise Broadband Voltage Noise Noise Density
VOUT/TA VOUT/t
Thermal Hysteresis (Note 4) Long Term Stability (Note 5)
OUTPUT DISABLE VENH VENL IINSD Enable Logic High (ON) Enable Logic Low (OFF) Shutdown Supply Current VEN 0.35V 0.4 1.6 0.8 1.5 V V A
3
FN6706.3 December 16, 2008
ISL21060
Electrical Specifications
PARAMETER VOUT VOA Output Voltage VOUT Accuracy @ TA = +25C ISL21060B25 ISL21060C25 TC VOUT Output Voltage Temperature Coefficient (Note 3) Input Voltage Range Supply Current Line Regulation Load Regulation VEN = VIN 2.7V < VIN < 5.5V Sourcing: 0mA IOUT 10mA Sinking: -5mA IOUT 0mA ISC tR Short Circuit Current Turn-on Settling Time Ripple Rejection eN VN Output Voltage Noise Broadband Voltage Noise Noise Density VOUT/TA VOUT/t Thermal Hysteresis (Note 4) Long Term Stability (Note 5) TA = +25C, VOUT tied to GND VOUT = 0.1% f = 10kHz 0.1Hz f 10Hz 10Hz f 1kHz f = 1kHz TA = +165C TA = +25C ISL21060B ISL21060C 2.7 16 50 3 130 50 300 75 10 2.5 60 100 100 -1.0 -2.5
(ISL21060-25, VOUT = 2.500V) VIN = 3.0V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
CONDITIONS MIN TYP 2.500 +1.0 +2.5 10 25 5.5 40 150 150 400 MAX UNIT V mV mV ppm/C ppm/C V A V/V V/mA V/mA mA s dB VP-P VRMS nV/Hz ppm ppm
DESCRIPTION
VIN IIN VOUT /VIN VOUT/IOUT
OUTPUT DISABLE VENH VENL IINSD Enable Logic High (ON) Enable Logic Low (OFF) Shutdown Supply Current VEN 0.35V 0.4 1.6 0.8 1.5 V V A
Electrical Specifications
PARAMETER VOUT VOA
(ISL21060-30, VOUT = 3.000V) VIN = 3.5V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
CONDITIONS MIN TYP 3.000 ISL21060B30 ISL21060C30 -1.0 -2.5 +1.0 +2.5 10 25 3.2 VEN = VIN 3.2V < VIN < 5.5V Sourcing: 0mA IOUT 10mA Sinking: -5mA IOUT 0mA 16 50 3 130 50 300 75 10 5.5 40 150 50 400 MAX UNIT V mV mV ppm/C ppm/C V A V/V V/mA V/mA mA s dB VP-P
DESCRIPTION Output Voltage VOUT Accuracy @ TA = +25C
TC VOUT
Output Voltage Temperature Coefficient (Note 3) Input Voltage Range Supply Current Line Regulation Load Regulation
ISL21060B ISL21060C
VIN IIN VOUT /VIN VOUT/IOUT
ISC tR
Short Circuit Current Turn-on Settling Time Ripple Rejection
TA = +25C, VOUT tied to GND VOUT = 0.1% f = 10kHz 0.1Hz f 10Hz
eN
Output Voltage Noise
4
FN6706.3 December 16, 2008
ISL21060
Electrical Specifications
PARAMETER VN
(ISL21060-30, VOUT = 3.000V) VIN = 3.5V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
(Continued) CONDITIONS 10Hz f 1kHz f = 1kHz TA = +165C TA = +25C MIN TYP 2.5 60 100 100 MAX UNIT VRMS nV/Hz ppm ppm
DESCRIPTION Broadband Voltage Noise Noise Density
VOUT/TA VOUT/t
Thermal Hysteresis (Note 4) Long Term Stability (Note 5)
OUTPUT DISABLE VENH VENL IINSD Enable Logic High (ON) Enable Logic Low (OFF) Shutdown Supply Current VEN 0.35V 0.4 1.6 0.8 1.5 V V A
Electrical Specifications
PARAMETER VOUT VOA TC VOUT VIN IIN VOUT /VIN VOUT/IOUT Output Voltage
(ISL21060-33, VOUT = 3.300V) VIN = 5.0V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
DESCRIPTION CONDITIONS MIN TYP 3.300 ISL21060C33 -2.5 +2.5 25 3.5 EN = VIN 3.5V < VIN < 5.5V Sourcing: 0mA IOUT 10mA Sinking: -5mA IOUT 0mA 18 20 10 120 50 300 75 10 2.5 60 100 100 5.5 40 150 50 400 MAX UNIT V mV ppm/C V A V/V V/mA V/mA mA s dB VP-P VRMS nV/Hz ppm ppm
VOUT Accuracy @ TA = +25C
Output Voltage Temperature Coefficient ISL21060C (Note 3) Input Voltage Range Supply Current Line Regulation Load Regulation
ISC tR
Short Circuit Current Turn-on Settling Time Ripple Rejection
TA = +25C, VOUT tied to GND VOUT = 0.1% f = 10kHz 0.1Hz f 10Hz 10Hz f 1kHz f = 1kHz TA = +165C TA = +25C
eN VN
Output Voltage Noise Broadband Voltage Noise Noise Density
VOUT/TA VOUT/t
Thermal Hysteresis (Note 4) Long Term Stability (Note 5)
OUTPUT DISABLE VENH VENL IINSD Enable Logic High (ON) Enable Logic Low (OFF) Shutdown Supply Current VEN 0.35V 0.4 1.6 0.8 1.5 V V A
5
FN6706.3 December 16, 2008
ISL21060
Electrical Specifications (ISL21060-41, VOUT = 4.096V) VIN = 5.0V, TA = -40C to +125C, IOUT = 0, unless otherwise specified.
PARAMETER VOUT VOA DESCRIPTION Output Voltage VOUT Accuracy @ TA = +25C ISL21060B41 ISL21060C41 TC VOUT Output Voltage Temperature Coefficient (Note 3) Input Voltage Range Supply Current Line Regulation Load Regulation EN = VIN 4.3V < VIN < 5.5V Sourcing: 0mA IOUT 10mA Sinking: -5mA IOUT 0mA ISC tR Short Circuit Current Turn on Settling Time Ripple Rejection eN VN Output Voltage Noise Broadband Voltage Noise Noise Density VOUT/TA VOUT/t Thermal Hysteresis (Note 4) Long Term Stability (Note 5) TA = +25C, VOUT tied to GND VOUT = 0.1% f = 10kHz 0.1Hz f 10Hz 10Hz f 1kHz f = 1kHz TA = +165C TA = +25C ISL21060B ISL21060C 4.3 20 50 10 130 50 300 75 10 2.5 60 100 100 -1.0 -2.5 CONDITIONS MIN TYP 4.096 +1.0 +2.5 10 25 5.5 40 150 50 400 MAX UNIT V mV mV ppm/C ppm/C V A V/V V/mA V/mA mA s dB VP-P VRMS nV/Hz ppm ppm
VIN IIN VOUT /VIN VOUT/IOUT
OUTPUT DISABLE VENH VENL IINSD NOTES: 3. Over the specified temperature range. Temperature coefficient is measured by the box method whereby the change in VOUT is divided by the temperature range; in this case, -40C to +125C = +165C. 4. Thermal Hysteresis is the change of VOUT measured @ TA = +25C after temperature cycling over a specified range, TA. VOUT is read initially at TA = +25C for the device under test. The device is temperature cycled and a second VOUT measurement is taken at +25C. The difference between the initial VOUT reading and the second VOUT reading is then expressed in ppm. For TA = +165C, the device under test is cycled from +25C to +125C to -40C to +25C. 5. Long term drift is logarithmic in nature and diminishes over time. Drift after the first 1000 hours will be approximately 10ppm/1khrs. Enable Logic High (ON) Enable Logic Low (OFF) Shutdown Supply Current VEN 0.35V 0.4 1.6 0.8 1.5 V V A
6
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-30) (REXT = 100k)
3.0020 3.0015 3.0010 VOUT (V) 3.0005 3.0000 2.9995 2.9990 2.9985 2.9980 -40 -20 0 20 40 60 80 100 120 UNIT 1 UNIT 3 UNIT 2 IIN (A) 14 13 12 11 10 3.0 3.5 4.0 VIN (V) 4.5 5.0 5.5 +25C -40C 17 16 15 +125C
TEMPERATURE (C)
FIGURE 1. VOUT vs TEMPERATURE, 3 UNITS
FIGURE 2. IIN vs VIN, 3 TEMPERATURES
2.0 1.8 1.6 1.4 IIN (A) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1 2 VIN (V) 3 +25C -40C 4 5 +125C
100 90 80 70 IIN (A) 60 50 40 30 20 10 0 0 1 2 3 VENABLE (V) 4 5 6 +125C +25C -40C
FIGURE 3. IIN vs VIN [SLEEP MODE], 3 TEMPERATURES
FIGURE 4. IIN vs VENABLE, 3 TEMPERATURES
1.2 1.0 +125C VOUT (mV) 0.8 0.6 0.4 0.2 0.0 -0.2 -10 -5 0 OUTPUT CURRENT (mA) -40C +25C VOUT (V) (NORMALIZED TO VIN = 5V)
20 -10 -40 -70 -100 -130 -160 3.0 3.5 4.0 VIN (V) 4.5 5.0 5.5 -40C +125C +25C
5
FIGURE 5. LOAD REGULATION
FIGURE 6. LINE REGULATION OVER-TEMPERATURE
7
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-30) (REXT = 100k) (Continued)
3.30 DROPOUT VOLTAGE (V) 3.25 3.20 3.15 3.10 3.05 -40C 3.00 2.95 -10 -8 -6 -4 LOAD CURRENT (mA) -2 0 +25C +125C 0 -10 -20 PSRR (dB) -30 -40 -50 -60 -70 -80 10 100 1nF 1k 10k FREQUENCY (Hz) 100k 1M NO LOAD 10nF
FIGURE 7. LOAD CURRENT vs DROPOUT
FIGURE 8. PSRR AT DIFFERENT CAPACITIVE LOADS
100 90 80 70 ZOUT () 60 50 40 30 20 10 0 1 10 100 1k 10k FREQUENCY (Hz) 100k 1M 10nF 1nF NO LOAD
FIGURE 9. ZOUT vs FREQUENCY
FIGURE 10. TURN-ON TIME, NO LOAD
FIGURE 11. TURN-ON TIME, 1k
FIGURE 12. LOAD TRANSIENT RESPONSE, 1nF LOAD CAPACITANCE
8
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-30) (REXT = 100k) (Continued)
FIGURE 13. LOAD TRANSIENT RESPONSE, 100nF LOAD CAPACITANCE
FIGURE 14. LINE TRANSIENT RESPONSE, 1nF LOAD
3.5 3.0 2.5 VOUT (V) 2.0 1.5 1.0 0.5 0.0 -0.5 0 1 2 3 VEN (V) 4 5 6 +25C -40C +125C
FIGURE 15. LINE TRANSIENT RESPONSE, 100nF
FIGURE 16. VOUT vs VENABLE
9
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-41) (REXT = 100k)
4.100 4.099 4.098 VOUT (V) UNIT 1 UNIT 2 UNIT 3 IIN (A) 4.097 4.096 4.095 4.094 4.093 4.092 -40 10 60 TEMPERATURE (C) 110 25 24 23 22 21 20 19 18 17 16 15 4.3 4.5 4.7 4.9 VIN (V) 5.1 5.3 5.5 UNIT 2 UNIT 1 UNIT 3
FIGURE 17. VOUT vs TEMPERATURE, 3 UNITS
FIGURE 18. IIN vs VIN, 3 TEMPERATURES
0.6 0.5 0.4 IIN (A) 0.3 0.2 0.1 0.0 0 2 VIN (V) 4 6 -40C +125C
100 90 80 70 IIN (A) +25C 60 50 40 30 20 10 0 0 2 VENABLE (V) 4 6 +125C +25C -40C
FIGURE 19. IIN vs VIN[SLEEP MODE], 3 TEMPERATURES
FIGURE 20. IIN vs VENABLE, 3 TEMPERATURES
0.6 VOUT (mV) 0.4 0.2 0 -0.2 -0.4 -0.6 -12 -10 -8 -40C +25C +125C
VOUT (V) (NORMALIZED TO VIN = 5V)
0.8
75 25 +25C -25 -40C -75 -125 -175 4.0 +125C
-6 -4 -2 0 LOAD CURRENT (mA)
2
4
6
4.2
4.4
4.6
4.8 VIN (V)
5.0
5.2
5.4
5.6
FIGURE 21. LOAD REGULATION
FIGURE 22. LINE REGULATION OVER-TEMPERATURE
10
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-41) (REXT = 100k)
4.40 DROPOUT VOLTAGE (V) 4.35 4.30 4.25 4.20 4.15 4.10 4.05 -8 -7 -6 -40C -5 -4 -3 LOAD CURRENT (mA) -2 -1 0 +25C +125C PSRR (dB)
(Continued)
0 1nF
-10 -20 -30 -40 -50 -60 -70 -80 10 100
NO LOAD
10nF
1k 10k FREQUENCY (Hz)
100k
1M
FIGURE 23. LOAD CURRENT vs DROPOUT
FIGURE 24. PSRR AT DIFFERENT CAPACITIVE LOADS
160 140 120 ZOUT () 100 80 60 40 20 0 1 10 100 1k 10k FREQUENCY (Hz) 100k 1M 10nF 100nF NO LOAD 1nF
FIGURE 25. ZOUT vs FREQUENCY
FIGURE 26. TURN-ON TIME, NO LOAD
FIGURE 27. TURN-ON TIME, 1k
FIGURE 28. LOAD TRANSIENT RESPONSE, 100nF LOAD CAPACITANCE
11
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-41) (REXT = 100k)
(Continued)
FIGURE 29. LOAD TRANSIENT RESPONSE, 1nF LOAD CAPACITANCE
FIGURE 30. LINE TRANSIENT RESPONSE, 1nF LOAD
4.5 4.0 3.5 VOUT (V) 3.0 2.5 2.0 1.5 1.0 0.5 +125C 1 2 3 VENABLE (V) 4 5 6 -40C
0.0 0
FIGURE 31. LINE TRANSIENT RESPONSE, 100nF LOAD CAPACITANCE
FIGURE 32. VOUT vs VENABLE
12
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-25) (REXT = 100k)
2.5030 2.5025 2.5020 VOUT (V) 2.5015 2.5010 2.5005 2.5000 2.4995 2.4990 2.4985 2.4980 -50 0 50 TEMPERATURE (C) 100 150 UNIT 3 UNIT 2 IIN (A) UNIT 1 16 15 14 13 12 11 10 9 8 2.5 3.0 3.5 4.0 4.5 VIN (V) 5.0 5.5 6.0 -40C +25C +125C
FIGURE 33. VOUT vs TEMPERATURE, 3 UNITS
FIGURE 34. IIN vs VIN, 3 TEMPERATURES
0.6 0.5 0.4 IIN (A) IIN (A) 0.3 0.2 0.1 0.0 0 1 2 3 VIN (V) 4 5 6 +25C -40C +125C
90 80 70 60 50 40 30 20 10 0 0 1 2 3 VENABLE (V) 4 5 6 -40C +25C +125C
FIGURE 35. IIN vs VIN [SLEEP MODE], 3 TEMPERATURES
FIGURE 36. IIN vs VENABLE, 3 TEMPERATURES
0.6 0.5 0.4
VOUT (mV)
50 -40C 0 VOUT (V) -50 -100
LINE REGULATION NORMALIZED AT VIN = 5 +125C +25C
0.3 0.2 0.1 0 -0.1 -0.2 +125C -0.3 -0.4 -12 -10 -8 LOAD REGULATION NORMALIZED TO VOUT WITH NO LOAD -6 -4 -2 0 LOAD CURRENT (mA) 2 4 6 +25C
-40C -150 -200 2.5
3.0
3.5
4.0 4.5 VIN (V)
5.0
5.5
6.0
FIGURE 37. LOAD REGULATION
FIGURE 38. LINE REGULATION OVER-TEMPERATURE
13
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-25) (REXT = 100k) (Continued)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.65 2.60 2.55 2.50 2.45 -11
DROPOUT VOLTAGE (V)
+125C
+25C
-40C -10 -9 -8 -7 -6 -5 -4 -3 LOAD CURRENT (mA) -2 -1 0
FIGURE 39. LOAD CURRENT vs DROPOUT
FIGURE 40. TURN-ON TIME, NO LOAD
FIGURE 41. TURN-ON TIME, 1k
FIGURE 42. LOAD TRANSIENT RESPONSE, 1nF LOAD CAPACITANCE
FIGURE 43. LOAD TRANSIENT RESPONSE, 100nF LOAD CAPACITANCE
FIGURE 44. LINE TRANSIENT RESPONSE, 1nF LOAD
14
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-25) (REXT = 100k) (Continued)
3.0 2.5 2.0 VOUT (V) 1.5 1.0 0.5 0 -0.5 0 0.5 1.0 +125C +25C 1.5 2.0 2.5 3.0 3.5 VENABLE (V) 4.0 4.5 5.0 5.5 -40C
FIGURE 45. LINE TRANSIENT RESPONSE,100nF
FIGURE 46. VOUT vs VENABLE
Typical Performance Curves (ISL21060-20) (REXT = 100k)
2.052 2.051 UNIT 2 VOUT (V) 2.050 2.049 2.048 2.047 2.046 -50 UNIT 1 UNIT 3 IIN (A) 14 13 12 11 10 9 8 7 6 0 50 TEMPERATURE (C) 100 150 2 3 4 VIN (V) 5 6 +25C -40C +125C
FIGURE 47. VOUT vs TEMPERATURE, 3 UNITS
FIGURE 48. IIN vs VIN, 3 TEMPERATURES
0.7 0.6 0.5 IIN (A) IIN (A) 0.4 0.3 0.2 0.1 0 0 1 2 3 VIN (V) 4 5 6 +25C -40C +125C
90 80 70 60 50 40 30 20 10 0 0 1 2 3 VENABLE (V) 4 5 6 +125C -40C +25C
FIGURE 49. IIN vs VIN [SLEEP MODE], 3 TEMPERATURES
FIGURE 50. IIN vs VENABLE, 3 TEMPERATURES
15
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-20) (REXT = 100k) (Continued)
0.6 VOLTAGE DIFF (mV) 0.4 0.2 0 -0.2 +125C -0.4 -0.6 -12 -10 -8 -6 -4 -2 LOAD (mA) 0 2 4 6 -40C +25C CHANGE IN OUTPUT (V) 100 50 0 -50 -100 -150 -200 -250 -300 -350 2 3 4 VIN (V) 5 6 +125C -40C +25C
FIGURE 51. LOAD REGULATION
FIGURE 52. LINE REGULATION OVER-TEMPERATURE
2.8 2.7 DROPOUT VOLTAGE 2.6 2.5 2.4 2.3 2.2 2.1 2.0 -12 -40C -10 -8 -6 -4 LOAD CURRENT (mA) -2 0 +25C +125C PSRR (dB)
0 -10 -20 -30 -40 -50 -60 -70 -80 10 100 1k 10k FREQUENCY (Hz) 100k 1M 10nF NO LOAD 1nF
FIGURE 53. LOAD CURRENT vs DROPOUT
FIGURE 54. PSRR AT DIFFERENT CAPACITIVE LOADS
90 80 70 60 ZOUT () 50 40 30 20 10 0 1 10 100 1k 10k FREQUENCY (Hz) 100k 1M 10nF 1nF NO LOAD
FIGURE 55. ZOUT vs FREQUENCY
FIGURE 56. TURN-ON TIME, NO LOAD
16
FN6706.3 December 16, 2008
ISL21060 Typical Performance Curves (ISL21060-20) (REXT = 100k) (Continued)
FIGURE 57. TURN-ON TIME, 1k
FIGURE 58. LOAD TRANSIENT RESPONSE, 1nF LOAD CAPACITANCE
FIGURE 59. LOAD TRANSIENT RESPONSE, 100nF LOAD CAPACITANCE
FIGURE 60. LINE TRANSIENT RESPONSE,1nF LOAD
2.5 2.0 VOUT (V) -40C 1.5 1.0 0.5 0.0 -0.5 0 1 +125C +25C 2 3 VENABLE (V) 4 5 6
FIGURE 61. LINE TRANSIENT RESPONSE,100nF
FIGURE 62. VOUT vs VENABLE
17
FN6706.3 December 16, 2008
ISL21060
FGA Technology
The ISL21060 voltage reference floating gate references passes very low drift and supply current. The charge stored on a floating gate cell is set precisely in manufacturing. The reference voltage output itself is a buffered version of the floating gate voltage. The resulting reference device has excellent characteristics which are unique in the industry and include very low temperature drift, high initial accuracy, and almost zero supply current. Also, the reference voltage itself is not limited by voltage bandgaps or zener settings, so a wide range of reference voltages can be programmed (standard voltage settings are provided, but customer-specific voltages are available). The process used for these reference devices is a floating gate CMOS process, and the amplifier circuitry uses CMOS transistors for amplifier and output drive. This circuitry provides excellent accuracy with a trade-off in output noise level and load regulation due to the MOS device characteristics. These limitations are addressed with circuit techniques discussed in other sections. bandpass filter made of a 1-pole high-pass filter with a corner frequency at 0.1Hz and a 2-pole low-pass filter with a corner frequency at 12.6Hz to create a filter with a 9.9Hz bandwidth. Noise in the 10kHz to 1MHz bandwidth is approximately 100VP-P with no capacitance on the output. This noise measurement is made with a 2 decade bandpass filter made of a 1-pole high-pass filter with a corner frequency at 1/10 of the center frequency and 1-pole low-pass filter with a corner frequency at 10x the center frequency. Load capacitance up to 1F can be added to improve transient response.
Turn-On Time
The ISL21060 devices have low supply current and thus the time to bias-up internal circuitry to final values will be longer than with higher power references. Normal turn-on time is typically 300s. Circuit design must take this into account when looking at power-up delays or sequencing.
Temperature Coefficient
The limits stated for temperature coefficient (tempco) are governed by the method of measurement. The overwhelming standard for specifying the temperature drift of a reference is to measure the reference voltage at two temperatures take the total variation, (VHIGH - VLOW), and divide by the temperature extremes of measurement (THIGH - TLOW). The result is divided by the nominal reference voltage (at T = +25C) and multiplied by 106 to yield ppm/C. This is the "Box" method for specifying temperature coefficient.
Micropower Supply Current and Output Enable
The ISL21060 consumes extremely low supply current due to the proprietary FGA technology. Low noise performance is achieved using optimized biasing techniques. Supply current is typically 16A and noise is 10VP-P, benefitting precision, low noise portable applications, such as handheld meters and instruments. The ISL21060 devices have the EN pin, which is used to Enable/Disable the output of the device. When disabled, the reference circuitry itself remains biased at a highly accurate and reliable state. When enabled, the output is driven to the reference voltage in a relatively short time (about 300s). This feature allows multiple references to be connected and one of them selected. Another application is to disable any loads that draw significant current, saving power in standby or shutdown modes.
VOUT Kelvin Sensing
The voltage output for the ISL21060 has both a force and a sense output. This enables remote kevin sensing for highly accurate voltage setting with long traces and higher current loads. The VOUTF (force) can be routed to the load with the shortest, widest trace possible. The VOUTS (sense) is routed with a narrower trace to the point of the actual load where it is connected to the VOUTF trace. The VOUTF and VOUTS traces must always be connected. If there is only a short trace to the load or even a very light load, then they can be connected at or near the ISL21060 device.
Board Mounting Considerations
For applications requiring the highest accuracy, board mounting location should be reviewed. The device uses a plastic SOIC package, which will subject the die to mild stresses when the PC board is heated and cooled and slightly changes shape. Placing the device in areas subject to slight twisting can cause degradation of the accuracy of the reference voltage due to these die stresses. It is normally best to place the device near the edge of a board, or the shortest side, as the axis of bending is most limited at that location. Mounting the device in a cutout also minimizes flex. Obviously, mounting the device on flexprint or extremely thin PC material will likewise cause loss of reference accuracy.
Noise Performance and Reduction
The output noise voltage in a 0.1Hz to 10Hz bandwidth is typically 10VP-P. The noise measurement is made with a
18
FN6706.3 December 16, 2008
ISL21060 Typical Application Circuits
+2.7 TO 5.5V 0.1F 10F
LOGIC ENABLE
VIN EN VOUTF VOUTS
ISL21060-25 VOUT = 2.50V GND
0.001F VCC RH + EL8178 RL VOUT (BUFFERED) VOUT (UNBUFFERED)
X9119 SDA 2-WIRE BUS SCL VSS
FIGURE 63. 2.5V FULL SCALE LOW-DRIFT, 10-BIT ADJUSTABLE VOLTAGE SOURCE WITH LOW POWER DISABLE
+2.75V TO 5.5V 0.1F 10F
LOGIC ENABLE EN
VIN VOUTF VOUTS SEPARATE COPPER TRACE FOR SENSE INPUT VOUT SENSE LOAD
ISL21060-25 VOUT = 2.50V GND
FIGURE 64. KELVIN SENSED LOAD
19
FN6706.3 December 16, 2008
ISL21060 SOT-23 Package Family
e1 A N 6 4
MDP0038
D
SOT-23 PACKAGE FAMILY MILLIMETERS SYMBOL A A1 SOT23-5 1.45 0.10 1.14 0.40 0.14 2.90 2.80 1.60 0.95 1.90 0.45 0.60 5 SOT23-6 1.45 0.10 1.14 0.40 0.14 2.90 2.80 1.60 0.95 1.90 0.45 0.60 6 TOLERANCE MAX 0.05 0.15 0.05 0.06 Basic Basic Basic Basic Basic 0.10 Reference Reference Rev. F 2/07 NOTES:
E1 2 3
E
A2 b c
0.20 C
0.15 C D 2X 5 e B b NX 1 2 3 2X 0.20 M C A-B D
D E E1 e e1 L L1 N
0.15 C A-B 2X C D
1
3
A2 SEATING PLANE 0.10 C NX A1
1. Plastic or metal protrusions of 0.25mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25mm maximum per side are not included. 3. This dimension is measured at Datum Plane "H". 4. Dimensioning and tolerancing per ASME Y14.5M-1994. 5. Index area - Pin #1 I.D. will be located within the indicated zone (SOT23-6 only).
(L1)
H
6. SOT23-5 version has no center lead (shown as a dashed line).
A
GAUGE PLANE c L 0x +3 -0
0.25
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 20
FN6706.3 December 16, 2008

▲Up To Search▲

Price & Availability of ISL21060BFH625Z-TK

	To Download ISL21060BFH625Z-TK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .